配置程序允许虚拟机使用虚拟网络，有两种类型的网络配置：Bridge（网桥）模式和Host-only（仅宿主机模式）。网桥网络是连接到物理网卡上的虚拟网络，虚拟机可以通过网桥网络连接外部网络──通过物理网卡连接的外部网络。
仅宿主机网络是仅供宿主机、虚拟机通信的虚拟网络，Host-only网络上的虚拟机只能和宿主机、或其它虚拟机直接通信。一个虚拟机可以同时配置多个Bridged网络或Host-only网络。
回答“yes”后，将会出现以下提示信息，表示系统正在配置桥接网络组件（vmnet0）和NAT网络组件（vmnet8）：
Configuring a bridged network for vmnet0.Configuring a NAT network for vmnet8. |
2．Do you want this program to probe for an unused private subnet? (yes/no/help)
这是询问是否需要配置程序搜索未使用的专用子网地址，这里可以回答“yes”。如果不明白这个问题的具体含义，只要键入“help”即可查看详细帮助信息：
Virtual machines configured to use NAT networking are placed on a virtual network that is confined to this host. Virtual machines on this network can communicate with the network through the NAT process,with each other, and with the host. |
虚拟专用网络上的虚拟机是通过NAT进程来和宿主机、其它虚拟机进行通信。
To setup NAT networking you need to select a network number that is normally unreachable from the host. We can automatically select this number for you, or you can specify a network number that you want. |
要正确设置NAT网络，必须选择一个从宿主机无法访问的网络地址。配置程序可以为我们自动选择一个合适的网络地址，或者也可以自己指定一个网络地址。
The automatic selection process works by testing a series of Class C subnet numbers to see if they are reachable from the host. The first one that is unreachable is used. The subnet numbers are chosen from the private network numbers specified by the InternetEngineering Task Force (IETF) in RFC 1918 (http://www.isi.edu/in-notes/rfc1918.txt). |
配置程序可以自动测试一组C类网络地址来查看是否可以从宿主机访问，配置程序会自动选择第一个无法访问的网络地址。
Virtual machines residing on the NAT network will appear as thehost when accessing the network. These virtual machines on the NAT network will not be accessible from outside the host machine. This means that it is OK to use the same number on different systemsso long as you do not enable IP forwarding on the host. |
NAT网络上的虚拟机可以像宿主机一样访问外部网络，但是外部网络的计算机无法访问NAT网络上的虚拟机。这意味着只要不启用宿主机的IP转发功能，不同的虚拟机就可以采用同一个IP地址。
回答“yes”之后，系统将出现以下提示信息，表示已经搜索到一个合适的网络地址（192.168.120.0，子网掩码255.255.255.0）。
Probing for an unused private subnet (this can take some time)...The subnet 192.168.120.0/255.255.255.0 appears to be unused.…… |
3．Do you want this program to automatically configure your system to allow your virtual machines to access the host's filesystem? (yes/no/help)
这是询问是否需要配置程序自动配置系统，使得虚拟机可以访问宿主机的文件系统。按“help”查看帮助信息：